Edit A Sequence - Brady M610 User Manual

7. If you want the values to increment dependently, as described in
Example" on page
8. Press ENTER.
The sequence is placed on the labels and the total number of labels is shown in the upper right
corner of the screen.
Note: Linked serializations do not have to display at the same position on the label. They can be in
separate locations within the label. See below.
To add multiple sequences, displayed at different locations on the label:
1. Position the cursor on the label where you want the first sequence to display.
2. Press SERIAL.
3. Enter the values for the first sequence.
•
•
•
4. Navigate to OK and press ENTER to return to the editing screen.
5. On the editing screen, navigate to the next sequence location (cursor position) on the label.
6. Press SERIAL.
The values from the first sequence are already filled in.
7. Select the Add Seq 2 box.
8. In the Sequence #2 enter the start and end values for that sequence, as well as the increment.
9. Navigate to OK and press ENTER.

Edit a Sequence

You can change the serialization values after a sequence has been determined.
To edit the sequence values:
1. Press SERIAL.
The screen displays the current sequence values.
2. Select the value fields to change and enter the new values.
Note: If using multiple serialization at different positions on the label, be sure Add Seq 2 option box
is checked.
3. When ready, navigate to OK and press ENTER.
To delete a sequence:
In the editor, with the cursor to the right of the value in a sequence, press the BACKSPACE key.
M610 Label Printer User Manual
48, select Linked.
In the Start Value field, enter the start value of the sequence. If the start value is larger than
the end value, the series will decrement automatically.
In the End Value field, enter the end value of the sequence.
In the Increment field, enter the amount to increment each value in the sequence. For
example, a sequence beginning with 1 with an increment of 2 yields: 1, 3, 5, 7, 9, and so on.
Editing Labels on the Printer
Serialization (Sequential Data)
"Advanced, Dependent
49