Graphics; Import Graphics; Add A Graphic - Brady M610 User Manual

4. Select the desired symbol.
5. Press ENTER.
The symbol displays with the same font size that is currently in use.
To remove a symbol from the label:
1. Position the cursor to the right of the symbol.
2. Press the Backspace key.

Graphics

Graphics are symbols, logos, or other artwork supplied from an outside source, such as a computer.
These graphics must be bitmap files (*.bmp) and can only be black and white. The printer will
automatically resize the graphic, but it is important to keep the graphic size approximate to the printed
output (about 2-inch x 2-inch). The imported graphic file size cannot exceed 40KB.

Import Graphics

Graphics are added to the printer through the Import function. This function displays in the File menu if
an external storage device, such as a USB drive, is attached.
To import graphics to the printer:
1. Download a graphic from the computer to a USB drive.
2. Plug the USB drive containing the graphic into the printer.
3. Press FN + FILE.
4. Select Import.
5. Select Graphics, then choose the graphic and press ENTER.
Graphic files (.bmp) are stored on the printer in a specific folder used by the Graphics function. This
folder is unavailable to the user and therefore, when importing a graphic, the destination screen does
not display. Unlike symbols, imported graphics are not categorized. However, the most recently used
graphic displays first in the window.
For a more comprehensive discussion of importing files, refer to
on page 70.

Add a Graphic

To add a personal graphic to your label:
1. Position the cursor at the point where you want the graphic to display.
2. Press FN and GRAPHICS to view the graphics saved to the printer.
The graphics grid displays the most recently used graphic first.
3. Select the desired graphic and press ENTER.
Note: The graphic displays at the same size as the font.
M610 Label Printer User Manual
Editing Labels on the Printer
"Using Files from an External Source"
Graphics
43