Battery - Brady M610 User Manual

Battery

.
M610 Label Printer User Manual
WARNING!
• Do not operate the printer in temperatures above 120° F (49° C) or below
37° F (3° C).
• Do not store the printer in temperatures above 122° F (50° C) or below -14° F
(-10° C).
• Do not disassemble or mistreat the battery pack.
• Do not attempt to open, damage, or replace components in the battery pack.
• The battery pack should only be used and charged in a Brady compatible
printer.
• Do not allow metal or other conductive materials to touch the battery terminals
WARNING!
The battery pack is not intended to be transportable. When not in
use, the battery pack should be stored in the M610 Label Printer
hard case, M610 Label Printer soft case, or equivalent casing to
prevent possible damage to the battery pack.
• Keep the battery pack away from sparks, flames, or other heat sources.
• Keep the battery pack away from water.
• Never lay objects on top of the battery pack.
• Store your battery pack only in a cool, dry place.
• Keep the battery pack out of the reach of children.
• At the end of battery life, replace your old battery only with the Brady M610
Label Printer battery pack.
• The battery pack must be recycled or disposed of properly according to
federal, state, and municipal regulations.
CAUTION Risk of Explosion if battery is replaced by incorrect type.
Dispose of used batteries according to instructions.
Setup
Power
6