Add A Barcode; Add A Data Matrix Or Qr Code; Edit Barcode Data - Brady M610 User Manual

Add a Barcode

The barcode key acts as a toggle between a barcode and text. Press once to turn it on, press again to
turn it off.
To add a barcode:
1. Position the cursor where you want to add the barcode. See
page
2. Press FN + LIST keys.
3. Enter the barcode data.
The barcode displays on the screen as the data is being entered. The image below shows the
barcode placed within a line of text with the human readable text below the barcode.
If the human readable text were set to None, the barcode data would appear in the middle of
the barcode as you are entering it, but would not be visible once you finished.
4. When finished with the barcode entry, press ENTER to move the cursor to the next line,
automatically turning off the Barcode function.

Add a Data Matrix or QR Code

To add a Data Matrix or QR code:
1. Position the cursor where you want to add the Data Matrix or QR code.
2. Press FN + LIST keys.
3. Enter the value in the pop-up text box and press ENTER to place the Data Matrix or QR code.
4. Press ENTER again to go to the next line, if desired.

Edit Barcode Data

To edit barcode data:
1. Position the cursor on the barcode.
The barcode mode automatically turns on.
2. Edit the barcode text.
The barcode mode automatically turns off when you move past the last character of the barcode.
M610 Label Printer User Manual
32.
Editing Labels on the Printer
"Positioning the Cursor" on
Barcode
46