Add Serialization; Edit A Sequence; End Value - Brady BMP 21-PLUS User Manual

42
Serialization

Edit a Sequence

Add Serialization

To add serialization to labels:
1.
2.
A dialog box displays where you can enter the start value of the serialization, the increment
value, and the end value.
For simple serialization:
3.
4.
5.
The default increment is 1. If that is the desired increment, skip this entry field.
6.
Edit a Sequence
You can change the serialization values after a sequence has been determined. To edit the
sequence values, from anywhere on the label (the cursor does not have to be in the serialized
data set):
1.
The Serial dialog box displays with the current values listed.
2.
3.
BMP ® 21-PLUS/BMP ® 21-LAB User's Manual
Position the cursor on the label where you want the serialization to display.
Press SERIAL
With the cursor immediately displayed in the Start: field, enter the start value of the
sequence.
In the Increment field, enter the increment value.
In the End: field, enter the end value of the sequence.
To process the serialization, press Enter
Press SERIAL
Navigate to the value fields to change and enter the new value.
When finished, press Enter
.
.
.
.