Table of Contents
Advertisement
Software for Creating Labels
In addition to creating labels on the printer, you can use labeling software. Install labeling software on
your computer or mobile device, set up the connection to the printer, then use the software to design
labels and send them to the printer. (Refer to your local Brady website for other Brady software. Be
aware that older Brady labeling software may not automatically detect the printer and that the
information in this manual is based on the software listed below.)
•
Use the Brady Express Labels app on a mobile device. (Wireless printer model only.)
•
Use Brady Workstation software on a desktop or laptop computer.
Mobile (Bluetooth Model Only)
Download the Brady Express Labels app from the Apple® App Store or the Google Play™ store.
Desktop
Included with all M610 printers is an insert describing Brady Workstation Basic Design Suite along with
a link for download.
Brady Workstation software provides a variety of apps to simplify label creation for specific purposes. It
also provides easy-to-use apps for custom label design.
To get Brady Workstation software:
1. Make sure your computer is connected to the Internet.
2. Go to www.workstation.bradyid.com.
3. Follow the instructions on the screen to choose the right software for your purpose and
download it.
Installing the Windows Driver (Optional)
If you are using the Brady Express Labels app or Brady Workstation software, you do not need to
install the windows driver. Skip to
If you are using older Brady software or third-party software, you must install the Windows driver. See
the Driver Installation Guide PDF file on the USB flash drive that came with the printer.
M610 Label Printer User Manual
"Connecting the Printer" on page
Software for Creating Labels
12.
Setup
11
Advertisement
Table of Contents
