Advance - Advantech PAX-355-C8 Series User Manual

2.7

Advance

MENU
Aspect Ratio
Over Scan
Switching Time
DDCCI
Ultra Vivid
Over Scan
Ratio
DP option
(Option)
DP MST
(Option)
DP EDID
(Option)
Clone Mode
(Option)
DESCRIPTION
Used to select one of the various screen aspect
ratios.
Used to activate/deactivate the over scan func-
tion.
[ON,OFF]
Used to set the screen switching time.
Used to activate/deactivate the DDCCI function.
[ON,OFF]
Used to configure the ultra vivid screen.
[OFF, L, M, H]
Used to adjust screen over-scan ratio.
* After adjusting the over-scan ratio, set the
Over
Scan menu from Off to On.
Used to select a DP Version.
[D0, D1, D6]
Used to select a Multi stream transport.
[OFF, D0, D1, D6]
Clone mode should be set to Off to select DP
MST.
DP MST is active only if INPUT is selected as
DP.
Setting INPUT to AUTO SELECT disables DP
MST.
Not applicable.
Used to activate/deactivate the Clone mode.
[OFF, ON]
DP MST should be set to OFF to select Clone
mode.
For Clone mode to operate at 4K_60 Hz, the DP
option/D0 on the sub-monitor must also be set
to 1.2.
DEFAULT REMARKS
Full
OFF
2
ON
OFF
10
D0
OFF
ON
15 PAX-355-C8 User Manual
Display Data
Channel
Command
Interface
Display Port
Multi Stream
Transport
Apply in 1P
Mode