A.1
Cleaning the LCD panel
When the liquid crystal panel becomes dusty or dirty, wipe gently with a soft
cloth.
Do not rub the LCD panel with a hard or coarse material.
Do not apply pressure to the LCD surface.
Do not use OA cleaner as it will cause deterioration or discolor the LCD surface.
Note!
The anti-reflective front glass of this monitor is water-repellent.
Fingerprint marks that may remain on any parts of the front glass can be
easily wiped out by soft cloths. When the front glass gets stained by fin-
gerprints, wipe out the stains with a slightly moist soft cloth.
A.2
Cleaning the Cabinet
Firstly, unplug the power supply.
Gently wipe the cabinet with a soft cloth.
Dampen a cloth with a neutral detergent and water, wipe the cabinet and then
dry with a soft cloth.
Note!
Many plastics are used on the surface of the cabinet. Do not clean with
benzene, thinner, alkaline detergent, alcoholic system detergent, glass
cleaner, wax, polish cleaner, soap powder, or insecticide. Do not place
rubber or vinyl against the cabinet for long periods. These types of fluids
and fabrics can cause the paint to deteriorate, crack or peel.
A.3
Cleaning Agents Anti-Theft Kensington Lockist
Following chemical disinfectants list have been tested on this medical grade monitor.
No
1
2
3
4
5
6
7
8
9
10
KT-D213U8B User Manual
Cleaning Agents
Cidex
Isopropyl alcohol
Green tinctured soap
Windex
Alcohol
Alcohol 70%
Chloride 1000PPM
Incidin plus
Incidin Liquid
Mikrozid Liquid
24