Intel NetStructure ZT 4901 Technical Specification
  1. Manuals
  2. Brands
  3. Intel Manuals
  4. Network Router
  5. NetStructure ZT 4901
  6. Technical specification

Intel NetStructure ZT 4901 Technical Specification

Mezzanine expansion card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
TM
Intel
NetStructure
ZT 4901
Mezzanine Expansion Card
Technical Product Specification
April 2005
Order Number: 273800-005
Downloaded from
Elcodis.com
electronic components distributor

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NetStructure ZT 4901 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Intel NetStructure ZT 4901

Summary of Contents for Intel NetStructure ZT 4901

  • Page 1 ® Intel NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification April 2005 Order Number: 273800-005 Downloaded from Elcodis.com electronic components distributor...
  • Page 2 Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Intel Corporation.

  • Page 3: Table Of Contents

    Installing Accessories ........................23 Installing PMC Devices ....................... 23 Installing Fibre Channel Modules ..................25 Specifications ..........................28 DC Operating Characteristics ..................... 28 ® Intel NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...
  • Page 4 Fibre Channel Processor ....................44 System Hardware Monitor ....................44 User Documentation ......................45 Warranty Information ........................46 ® Intel NetStructure™ Compute Boards & Platform Products Limited Warranty....46 C.1.1 Returning a Defective Product (RMA) ..............46 C.1.2 For the Americas ....................47 C.1.3...
  • Page 5 13 J12/J22 (32-Bit PCI) PMC Connector Pinout................40 14 J13/J23 (64-Bit PCI Extension) PMC Connector Pinout............. 41 15 J24 (Rear Panel I/O) PMC Connector Pinout ................43 ® Intel NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...
  • Page 6 Updated warranty information. February 2003 Added note to 2.2.9. November 2002 Added two warnings, changes to power requirements. October 2002 First release of this document. ® Intel NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 7: Document Organization

    Document Organization Document Organization ® This document describes the operation and use of the Intel NetStructure ZT 4901 Mezzanine Expansion Card. The ZT 4901 is a 6U, single-slot I/O expansion (IOX) board which mates with the ® Intel NetStructure™ ZT 5524 Processor Board to provide the processor board with access to two PMC slots, a second CompactPCI* bus segment, Redundant System Slot (RSS) functionality, and dual 2 GB Fibre Channel ports.

  • Page 8: Introduction

    ZT 4901 to the needs of a specific application. Product Definition ® The ZT 4901 is a 6U, single-slot I/O expansion (IOX) board for use with the Intel NetStructure™ ZT 5524 Processor Board. The IOX board mates to a dedicated board-to-board connector on the ZT 5524 and provides the processor board with access to: •...

  • Page 9: Zt 4901 Features

    On-board health monitoring (I C) from the host processor board via private I C BMC interface • Compatible with the PICMG* 2.0 R3, 2.16, and 2.9 specifications. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 10: Functional Block Diagram

    PMC A PMC B Port Bypass Circuit FCA SFP1 and Fibre Channel SFP2 at Processor Faceplate FCA and FCB Port Bypass Circuit FCB Hot Swap Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 11: Faceplate Features

    SFP1 and SFP2 (for Fibre Channel A and B) Fibre Channel Status LEDs Ejector Handle 2.2.1 Faceplate Features The ZT 4091 faceplate has the following features: Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 12: Host Pci Bus

    2.2.5 PCI-to-PCI Bridge (P2P) ® The ZT 4901 features one Intel 21154 PCI-to-PCI bridge to support its J1/J2 CompactPCI interface. The bridge provides the isolation, arbitration, and clocks for up to seven PCI peripheral cards without the need for an external bridge board.

  • Page 13: Compactpci Interface Control

    Mode. When used in this manner, the CompactPCI Hot Swap Specification, PICMG 2.1, Version 1.0 does not apply. Refer to the High Availability Software Development Kit for Intel ® NetStructure CompactPCI System Master Processor Boards software manual for more information about operating the ZT 4901 in an RSS environment.

  • Page 14: Hot Swap Controller

    B can be chosen if connected via the Rear Panel I/O J5 connector). The bootable Fibre Channel device will then be detected by the ZT 5524 BIOS, and the user must Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...

  • Page 15: Port Bypass Circuit

    Fibre Channel A and B • IPMI • Rear Panel Eject Notification Appendix A, “J5 Rear Panel I/O Connector” for more information on the rear-panel I/O. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 16: Getting Started

    Check the shipping carton for damage. If the shipping carton and contents are damaged, notify Intel Customer Support. Retain the shipping carton and packing material for inspection by the carrier. Obtain authorization before returning any product to Intel. Refer to Appendix D, “Customer Support”...

  • Page 17: I/O Connectors

    Standoffs (5): Used to secure the boards together and maintain 0.8 in board spacing. • Ejector Ganging Pins (2): Used to tie together the operation of the boards' ejectors. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...

  • Page 18: Mounting The Iox Board

    The following instructions cover the mechanical aspects of attaching a ZT 4901 IOX Board to a ZT 5524 Processor Board. Refer to Figure 4 for an exploded view of the parts involved in this operation. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 19: Removing The Iox Board From The Processor Board

    The IOX board must be removed from the host processor board to add or change an accessory (such as a PMC device). For information about installing PMCs, refer to Chapter 5, “Installing Accessories.” Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...

  • Page 20: Installing The Iox/Processor Board Complex

    Refer to Figure 5 on page 20 for basic ejector handle operation instructions. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...

  • Page 21: System Monitoring And Management

    Local 3.3 V and IPMB_3.3 V supplies are monitored to generate on-chip and board power-on resets. 4.1.2 Onboard Temperature Onboard temperature is monitored using the on-chip temperature sensor and is configured per the ADM1026 datasheet. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 22: Hot Swap Controller Fault Condition

    The backplane Geographical Address is defined by the PICMG 2.0 CompactPCI Specification. 4.1.7 Rear Panel Board Presence The ADM1026 can detect the presence of a rear panel I/O board through the J5 RPIO connector. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 23: Installing Accessories

    If the standoffs are not installed, follow Step 6 of the instructions under Section 3.4, “Attaching the IOX Board to the Processor Board” on page 17 to attach them. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 24: Pmc Mounting Locations

    PMC faceplates installed in the board's faceplate PMC slots. 4. Insert the PMC's faceplate into the appropriate opening in the ZT 4901's faceplate (Step 1 in Figure 7 on page 25). Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...

  • Page 25: Installing Fibre Channel Modules

    2. Orient the transceiver's interface with the SFP interface on the ZT 4901. Refer to Figure 8 on page 26 for the location of the ZT 4901's SFP receptacles. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...

  • Page 26: Sfp/Msa Receptacle Locations

    3. Slide the transceiver into the receptacle until it seats (Step 1 in Figure 9 on page 27). 4. Connect the appropriate cable to the transceiver (Step 2 in Figure 9 on page 27). Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 27: Fibre Channel Transceiver Installation

    Installing Accessories Figure 9. Fibre Channel Transceiver Installation Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 28: Specifications

    Supply Voltage, +12: 15 V Supply Voltage, -12: -15 V Supply Voltage IPMPWR 6.5 V Storage Temperature (no hard disk): -40° to +85° Celsius Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 29: Thermal Requirements

    6U x 4HP (one slot, occupies two slots when combined with the ZT 5524) Weight 272.2 g (9.6 ounces) without accessory devices Board-to-Board Centerline 0.8” Spacing from Host Carrier: Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 30: Connectors

    Reserved (10-pin, male) Board-to-Board Connector (192-pin, female) J11, J12, and J13 PMCB Connectors (64-pin, female) J21, J22, J23, and PMCA Connectors (64-pin, female) Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...
  • Page 31 Figure 11. Connector Locations Figure 12. Backplane Connectors - Pin Locations SFP2 SFP1 J10 Board-to-Board (other side) Reserved J1 CompactPCI J2 CompactPCI J5 RPIO Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 32: J1 Compactpci Bus Connector

    = Interfaces to short connector pins on the backplane. NOTE: Row F interfaces to long connector pins on the backplane. All other signals interface to medium length connector pins on the backplane. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...

  • Page 33: J2 Compactpci Bus Connector

    C/BE[5]- 64EN- (NC) V(I/O) C/BE[4]- PAR64 RSS- BRSVP2B4 C/BE[7]- C/BE[6]- CLK4 GNT3- REQ4- GNT4- CLK2 CLK3 SYSEN- GNT2- REQ3- CLK1 REQ1- GNT1- REQ2- Pin# Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 34: J5 Rear Panel I/O Connector

    PMCA43 PMCA42 PMCA41 PMCA50 PMCA49 PMCA48 PMCA47 PMCA46 PMCA55 PMCA54 PMCA53 PMCA52 PMCA51 PMCA60 PMCA59 PMCA58 PMCA57 PMCA56 IPMB_PWR3 PMCA64 PMCA63 PMCA62 PMCA61 Pin# Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 35: J6 And J7 Sfp1 And Sfp2 Fibre Channel Ports

    The separation angle should be kept as low as possible as the contacts continue to unmate, thereby spreading out the unmating forces over the length of the connectors. The Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...

  • Page 36: J10 Board-To-Board Connector Pinout

    PCI_PAD27 PCI_PAD26 PCI_PAD25 VCC3 PCI_PAD24 PCI_PAD23 PCI_PAD22 PCI_PAD21 PCI_PAD20 IOXB_IDSEL IOXA_IDSEL PCI_PAD19 PCI_PAD18 LOC_INTC- PCI_PAD16 PCI_CBE-3 VCC3 PCI_FRAME- PCI_PAD17 PCI_STOP- PCI_CBE-2 PCI_TRDY- PCI_PAR PCI_PERR- Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...
  • Page 37 PCI_PAD53 PCI_PAD54 PCI_PAD51 PCI_PAD52 PCI_PAD49 PCI_PAD50 PCI_PAD47 PCI_PAD48 PCI_PAD45 PCI_PAD46 PCI_PAD43 PCI_PAD44 PCI_PAD41 PCI_PAD42 PCI_PAD39 PCI_PAD40 PCI_PAD37 PCI_PAD38 PCI_PAD35 PCI_PAD36 PCI_PAD33 PCI_PAD34 PCI_CBE-7 PCI_PAD32 Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...
  • Page 38 S2_ARB_LCKD MEZ_VIO S2_MODE_CH- S2_BMC_XFR_RQ SBC_RXP_B NC_MEZZSPARE0 SBC_RXN_B NC_MEZZSPARE1 NC_MEZZSPARE2 SBC_TXP_B NC_MEZZSPARE3 SBC_TXN_B NC_MEZZSPARE4 NC_MEZZSPARE5 SBC_RXP_A NC_MEZZSPARE6 SBC_RXN_A NC_MEZZSPARE7 ISP_TCK SBC_TXP_A SBC_BYPASS_A- SBC_TXN_A IPMB_PWR3 SBC_BYPASS_B- Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 39: J11 - J13 And J21 - J24 Pmc Connectors

    Function -12V INTA- INTB- INTC- BUSMODE1 INTD- PCI_RSVD0 IPMB_PWR GNT- REQ- AD31 AD28 AD27 AD25 CBE-3 AD22 AD21 AD19 AD17 FRAME- IRDY- DEVSEL- LOCK- Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...
  • Page 40 AD26 AD24 VCC3 IDSEL AD23 VCC3 AD20 AD18 AD16 CBE-2 PMC-RSVD0 TRDY- VCC3 STOP- PERR- VCC3 SERR- CBE-1 AD14 AD13 M66EN AD10 AD08 VCC3 Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...
  • Page 41 AD55 AD54 AD53 AD52 AD51 AD50 AD49 AD48 AD47 AD46 AD45 LOC_VIO AD44 AD43 AD42 AD41 AD40 AD39 AD38 AD37 AD36 AD35 AD34 AD33 Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...
  • Page 42 Specifications Table 14. J13/J23 (64-Bit PCI Extension) PMC Connector Pinout (Sheet 2 of 2) LOC_VIO AD32 PCI-RSVD5 PCI-RSVD6 PCI-RSVD7 PCI-RSVD8 Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...
  • Page 43 AD49 AD48 AD47 AD46 AD45 LOC_VIO AD44 AD43 AD42 AD41 AD40 AD39 AD38 AD37 AD36 AD35 AD34 AD33 LOC_VIO AD32 PCI-RSVD5 PCI-RSVD6 PCI-RSVD7 PCI-RSVD8 Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 44: Data Sheet Reference

    PCI-To-PCI Bridge For more information about the 21154 PCI-to-PCI bridge, refer to the 21154 PCI-to-PCI Bridge datasheet available from the Intel Website at: http://developer.intel.com/design/bridge/datashts/ Fibre Channel Processor For more information about the Qlogic* ISP2312 Fibre Channel Processor, refer to the product datasheet available on the Qlogic Website at: http://www.qlogic.com/products/fc_san_controllers.asp...

  • Page 45: User Documentation

    Data Sheet Reference User Documentation The latest Intel NetStructure product information and manuals are available on the Intel NetStructure Website. BIOS and driver updates are also available from this site. http://developer.intel.com/design/network/products/cbp/linecard.htm. Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com...

  • Page 46: Warranty Information

    If the product is found to be otherwise defective, Intel, at its option, will replace or repair the product at no charge except as set forth below, provided that you deliver the product along with a return material authorization (RMA) number (see below) either to the company from whom you purchased it or to Intel.

  • Page 47: For The Americas

    Return Material Authorization (RMA) credit requests e-mail address: requests.rma@intel.com Direct Return Authorization (DRA) repair requests e-mail address: uspss.repair@intel.com DRA on-line form: http://support.intel.com/support/motherboards/draform.htm Intel Business Link (IBL): http://www.intel.com/ibl Telephone No.: 1-800-INTEL4U or 480-554-4904 Office Hours: Monday - Friday 0700-1700 MST Winter / PST Summer C.1.3 For EMEA Return Material Authorization (RMA) e-mail address - emea.fs@intel.com...
  • Page 48 If the Customer Support Group verifies that the product is defective, they will have the Direct Return Authorization/Return Material Authorization Department issue you a DRA/RMA number to place on the outer package of the product. Intel cannot accept any product without a DRA/RMA number on the package. Limitation of Liability and Remedies...

  • Page 49: Customer Support

    Intel NetStructure product for service. Technical Support and Return for Service Assistance For all product returns and support issues, please contact your Intel product distributor or Intel Sales Representative for specific information. Sales Assistance If you have a sales question, please contact your local Intel ® NetStructure Sales Representative or the Regional Sales Office for your area.

  • Page 50: Agency Approvals

    Sect. 2 Electrostatic Discharge Sect. 3.2.2 Radiated RF Emissions Sect. 3.2.3 AC Line Conducted Emissions Sect. 3.3.1 RF Radiated Fields Sect. 3.3.3 RF Common Mode Intel® NetStructure ZT 4901 Mezzanine Expansion Card Technical Product Specification Downloaded from Elcodis.com electronic components distributor...

  • Page 51: Low Voltage Directive 73/23/Eec

    RFI and Radiated Immunity tests were conducted with a specific configuration representing an anticipated general application. Changes or modifications to peripheral devices and shielded cables not expressly approved by Intel could result in EMI interference. FCC compliance was achieved under the following conditions: •...

This manual is also suitable for:

Netstructure zt4901a-1aw

Table of Contents