Modes Of The Meter - JENCO 3177MB Operation Manual

ode
M
lear
C
lear
C
5
S tand
S tand

MODES OF THE METER

lope
S
lope
S
This instrument has six modes as follow:
ea.
M
ea.
M
ff
E .
ff
E .
Up & Down-
In the calibration mode, these two keys are used
to adjust the conductivity display value or K value.
In the "Recall" mode, view saved data and data
storage site number by pressing these keys.
In the "Delete ALL" mode, select between the
"YES" and "no" for data all delete.
In the "Delete One" mode, view to be deleted data
and data site numbers by pressing these keys.
1. Conductivity mode:
A measurement of the
conductive material in the
solution.
2. Salinity modes:
A measurement of the
salinity in the solution, the
calculation is based on the
conductivity and
temperature.
3. TDS modes:
A measurement of the total
dissolved solids (TDS), the
calculation is based on the
compensated conductivity.
6