General Introduction; Initial Inspection; Power Input - JENCO 3177MB Operation Manual

GENERAL INTRODUCTION

Thank you for selecting the 3177MB meter. The 3177MB is a
precision tool that measures Conductivity, Salinity, TDS and
temperature. A built-in microprocessor stores, calculates and
compensates for all parameters related to Conductivity. The
3177MB is a 5th generation Conductivity/ Salinity/TDS/temperature
Bluetooth benchtop meter with iOS and Android tablet connectivity.
This meter has a waterproof IP54 case. The mechanical keys are
highly reliable with tactile and audio feedback. It is powered by six
AAA-size alkaline batteries or with a UL/CE approved AC adapter
(OUTPUT:DC9 V). The meter also displays a "BAT" message when
the batteries are in need of replacement. Re-calibration is not
required when power is restored.
The front of the meter has a large LCD that displays Conductivity,
TDS, Salinity and temperature simultaneously along with user
prompts and mode indicators. The unit prompts the user through
calibration and measurement procedures.
The unit is also equipped with a non-volatile memory allowing the
user to store 750 different sets of readings. This unit will assign a
site number for each set of reading so the user can review the data
easily.
The model 3177MB comes with a Conductivity probe. Other
features include 1 point calibration for Conductivity, automatic
temperature compensation and 50/60 Hz AC noise rejection. This
meter is user-friendly for laboratory application.

INITIAL INSPECTION

Carefully unpack the unit and accessories. Inspect for damages
made in shipment. If any damage is found, notify your JENCO
representative immediately. All packing materials should be saved
until satisfactory operation is confirmed.

POWER INPUT

The model 3177MB can be powered by an UL/CE approved 100 to
240 V AC adaptor as well as 6 "AAA" alkaline batteries. Check the
label on the AC adaptor supplied with the meter to make sure that
the AC line voltage is correct. If the wrong AC adaptor is supplied,
notify your JENCO representative immediately.
2