Output Setting - RGBlink Q Series Quick Start Manual

Output Setting

Click any output port, the board where the port
locates is selected. Users can do settings to the
port now.
A red rectangle flashes around the chosen port
when it is clicked.
Resolution
SDI and HDMI output modules support resolution
settings.
Output resolution supports ALL and MODULE
Format Range optional.
Please refer to the figures in the right.
DE:
Port: Current Port/All Port
Type: DVI/HDMI
Bits: Fixed value 8 bits
OSD: Please Turn ON Status before setting
Q16pro output modules which support OSD as
shown below:
●Quad HDMI 1.3 Output Module
●Quad 3G SDI Output Module (to be published)
●Quad DVI Output Module (to be published)
●Dual HDMI 2.0 Output Module (to be published)
●IP Output Module (to be published)
Order Codes please refer to 4.2 Chapter.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
13