RGBlink Q Series Quick Start Manual page 25

Preset Name
Select a bank and click Preset Name, fill in the blank after
New Preset Name to rename a Preset (Bank)
Click the color block after Color Selection and choose a new
color for the boarder of chosen bank.
Hotkey
Use hotkey to let the operation in Preset
Management more convenient.
2. Schedule Mode
This mode is designed to set auto bank
(scene/preset) switch.
Steps are as follows：
1. Turn on "Schedule Mode"
2. Choose "Times Loop" in Loop Mode
3. Choose the BANK
4. Fill in the "Duration"
5. Click "OK"
Users can click to edit and
After settings done, turn on Loop Switch.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
to delete.
23