Table of Contents
Advertisement
User Manual CANopen / Ethernet
Document code: MN67503_ENG
Revision 2.100
Page 11 of 33
Industrial Electronic Devices
ETHERNET:
The Ethernet connection must be made using Connector5 of HD67503-A1/HD67503-B2 with at least a Category 5E cable. The maximum
length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To
connect the device to a Hub/Switch the use of a straight cable is recommended. To connect the device to a PC/PLC/other the use of a cross
cable is recommended.
ADFweb.com S.r.l.
Advertisement
Table of Contents
Need help?
Do you have a question about the axis HD67503-A1 and is the answer not in the manual?
Questions and answers