Setting Up The Strong Arm - Verathon Aperture User Manual

2 Setting Up

Setting up the Strong Arm

After the Strong Arm is mounted to an equipment rail, the device holder
can be attached to the Strong Arm. Then the Aperture Baton can be
attached to the device holder.
To set up the Strong Arm:
1. Hold the fl at face of the Strong Arm post in the center of the Strong
Arm clamp as you hold the clamp against the equipment rail. See
Figure 19.
Parts:
Strong Arm Kit
(includes arm, clamp, and device holder)
Figure 19
page 42
0800-0330
Aperture™ Surgical Surveyor User's Manual