Table of Contents
Advertisement
2 Setting Up
Supplying Power
To supply power to the Aperture™ Surgical Surveyor:
1.
Insert the male end of the power cord into an appropriate power
source. For compatibility details, see the label located on the back of
the Transfer Module.
2.
Push the retainer back, insert the female end of the power cord into
the power port. See Figure 21.
Parts:
Transfer Module
AC Power Cord
Figure 21
3.
Secure the plug in place with the retainer. See Figure 21.
4.
Press the
POWER button on the face of the Transfer Module.
page 44
Power Port
Retainer
0570-0203
See Appendix A
Aperture™ Surgical Surveyor User's Manual
Advertisement
Table of Contents
