Guardian Fall Protection 00691 Instruction Manual page 6

Wood Installation:
1. Use (20) #14-10 wood screws, or fasteners deemed compatible by a Competent Person, at all wood/metal
fastener installation locations (see image on pg. 4).
2. All fasteners MUST be fully embedded in substrate.
3. DO NOT apply torque to fasteners.
4. All fasteners MUST be used.
Metal Installation:
1. Use (20) #14-10, 2" metal screws, or fasteners deemed compatible by a Competent Person, at all
wood/metal fastener installation locations (see image on pg. 4).
2. All fasteners MUST be fully embedded in substrate.
3. DO NOT apply torque to fasteners.
4. Guardian Fall Protection recommends all (20) fasteners be used for installation, however a MINIMUM 16
fasteners MUST be used. ONLY use fewer than 20 fasteners if valley exists in metal substrate that prevents all
20 fasteners from being fully embedded.
5
(20) #14-10 wood
screws
MINIMUM 5/8"
thick CDX
(16 to 20) #14-10, 2"
metal screws
MINIMUM 24 gauge