Adtech 4 Series Maintenance Manual page 71

Note
Arc Inp Mode
017
Range
Unit
Authority
Default
Effective time
Note
interpolation speed mode
018
Range
Unit
Authority
Default
Effective time
Note
GCode pre-treatment
019
Range
Unit
Authority
Default
Effective time
Note
'O'Pro Scan
020
Range
Unit
Authority
Default
Effective time
Note
ADTECH 4 series CNC System (maintainance Manual)
Set the tool retracting amount Q value in G73 and G83 instructions; this
:
parameter (default: 2mm) is set according to actual chip removal effect.
: Pos split / time split
:
: Operation admin or higher
: Pos split
: Instant
Set the Arc interpolation mode ,pos split :when excute pretreatment,the
:
controller excute program with small lines ; time split: :when excute
pretreatment,the controller excute program with time (4s per period)
: Angle / Speed / Speed1
: None
: Operation admin or higher
: Speed1
: Instant
At pretreatment mode, if the setting is Angel,that means the
:
controller works as The corner speed balancing algorithm; if it is
speed ,it works as axis acceleration
speed1 ,it works as high effcient
: Real time /Preprocesss
: None
: Operation admin or higher
: real time
: Instant
Real-time processing is suitable for machine debug
:
In pretreatment mode, after controller start working ,there are 2s for
buffering and pre-reads. For The pretreatment ,the controller can check
the direction and size of feeding segment to adjust the speed
automatically and get an optimized speed.
: 0~1
: None
: Operation admin or higher
: 1
: Instant
File scanning can quicken the file transfer speed when processing large
:
files.
When transferring NC files, the system needs to scan over to position
every program block. In this way, if the file only has one program
segment and the file size is very big, it will cause unnecessary waiting
time. If this option is closed, the system will exit after scanning the
address of first program segment
balancing algorithm; if it is
acceleration balancing algorithm.
67