(3) SD-SDI input module
DK-801A
SDI
4:2:2
CH A
CH B
(
)
MONITOR
OUT
(4) NTSC/PAL-B decoder input module
NTSC
PAL
CH A
CH A
CH B
CH C
SYNC
SD-SDI A/B input
• Input the 4:2:2 SD-SDI signal here according to the following module.
• When this module and multi SDI module are mounted together, this module will be assigned to the
2nd slot. To select the 2nd slot, press the 2nd slot switch.
SD-SDI A output
• The SD-SDI signal input to the A channel output here.
SD-SDI B output
• The SD-SDI signal input to the B channel is
output from here.
• The signal selected at the monitor can also be
output from here by setting the connector inside
the module.
Decorder module
NTSC
NTSC/PAL-B 3 line comb decoder module (DE-811)
PAL
NTSC 3 line comb decorder module (DE-801)
NTSC
NTSC or PAL-B analog composite input
• Input NTSC/PAL-B analog composite signal here.
• If not adopting the loop through connection method, connect the terminated plug.
• When using in the external sync mode, input the external sync signal into the SYNC input
connector of VIDEO PROCESS module described in Section (1) with the DE-801, and into the
SYNC input connector (see below) of the same module with the DE-811.
EXT SYNC signal input (with the DE-811 decoder module only)
• When using the composite signal input of DE-811 in the external sync mode, input the sync signal
here. The input signal of DE-811 is not compatible with the SYNC input of VIDEO PROCESS
module. The DE-811 module's SYNC input is not handled on other modules.
• If not adopting the loop through connection method, connect the terminated plug.
13
<Setting Method>
NORMAL(Default)
MONITOR OUT