Ikegami HTM-1517R Operation Manual page 31

⑱ R. BACKGROUND switch
Switch for adjusting the low light white balance
(blue component).
For details of the adjustment, refer to 4-6 (3).
⑲ G. GAIN switch
Switch for adjusting the high light white balance
(green component).
For details of the adjustment, refer to 4-6 (3).
⑳ B. GAIN switch
Switch for adjusting the high light white balance
(green component).
For details of the adjustment, refer to 4-6 (3).
HUE PRESET switch
２ １
Switch for adjusting the HUE PRESET data.
This circuit operates only when the decoder module
DE-801 or DE-811 is mounted and the analog NTSC
composite signal or digital (D2) NTSC composite
signal input is selected.
For details of the adjustment, refer to 4.6 (4).
CHROMA PRESET switch
２ ２
Switch for adjusting the CHROMA PRESET data.
For details of the adjustment, refer to 4.6 (4).
BRIGHT PRESET switch
２ ３
Switch for adjusting the BRIGHTNESS PRESET
data.
This circuit does not operate in the DELAY state.
For details of the adjustment, refer to 4.6 (1).
CONTRAST PRESET switch
２ ４
Switch for adjusting the CONTRAST PRESET
data.
For details of the adjustment, refer to 4.6 (2).
STORE FILE switch
２ ５
Switch for copying the currently displayed color
temperature data to FILE 1 to FILE 3.
FILE 1 to FILE 3 blink when the switch is pressed.
Press the desired destination FILE switch. The
FILE LED lights up and the data is copied to the
FILE.
The PRESET data to be stored includes the fol-
lowing nine data shown in the white frames on the
panel.
HUE, CHROMA, BRIGHT, CONT,
R.BKG, G.BKG, B.BKG, G.GAIN, B.GAIN
FILE 1 switch
２ ６
Set this switch to ON to output or store data in
FILE 1.
FILE 2 switch
２ ７
Set this switch to ON to output or store data in
FILE 2.
FILE 3 switch
２ ８
Set this switch to ON to output or store data in
FILE 3.
MENU switch
２ ９
Switch to call various menus.
ENT switch
３ ０
Switch to execute MENU operations.
ESC switch
３ １
Switch to exit MENU.
U. DISPLAY switch
３ ２
Not available in this version.
ASP-80 connector
３ ３
Used for connecting the auto setup probe ASP-80
[option].
ROTARY ENCORDER
３ ４
Used for changing the PRESET data in the drawer
panel and selecting the marker, menu mode and
other items.
23