Multi-Format Sdi Input Module - Ikegami HTM-1517R Operation Manual

(2) Multi-format SDI input module

DKM-511*
HD /
4:2:2
SDI
CH A
CH B
MONITOR
OUT
DKM-511*AV (compatible with 2 embedded analog audio outputs)
AUDIO LINE OUT
DKM-511AV
DKM-511*AVD (compatible with 8 embedded digital audio outputs)
AES/EBU OUT
CH 1/2
CH 3/4
CH 5/6
CH 7/8
DKM-511AVD
SDI A/B signal input
• Input the HDTV or SDTV (4:2:2) signal here.
• Input signal format is automatically identified to control the monitor.
SDI signal output
• Output the same selected channel signal from the A/B channel as channel select is made for
monitoring.
AUDIO LINE OUT
• Select one pair of channels out of four paired channels in the MENU, and output 2-channel analog
audio signal from this connector.
• Use XLR-5-11C or equivalent as an output connector.
• Pin function
Pin 1: GND
1 5
Pin 2: Odd channel hot output / Pin 3: Odd channel cold output
2 4
3 Pin 4: Even channel hot output / Pin 5: Even channel cold output
• When active balanced system output is used in unbalanced state, connect the cold side to GND.
AES/EBU OUT
• Digital audio signals in AES/EBU format output.
Consumer format (SPDIF) is not supported.
• Use a converter when connecting the equipment of 110Ω impedance.
12