Table of Contents
Advertisement
Chapter 3 Overview
User settings (continued)
Submenu
In/Out settings
Redundancy mode
(continued)
[ The UPS
unit must be
in Standby
Mode in order
to change the
In/Out
settings ]
On/Off settings
Cold start
Forced reboot
Auto restart
Auto start
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG
Available settings
[Unitary UPS] [Hot Standby]
Force slew rate value to 0.5Hz/s
[Enabled] [Disabled]
Authorize the product to start on
battery power.
[Enabled] [Disabled]
If utility power recovers during a
shutdown sequence:
If Enabled, the shutdown sequence will
complete and wait 10 seconds prior to
restart. If Disabled, the shutdown
sequence will not complete and restart
will occur immediately.
[Enabled] [Disabled]
Authorize the product to restart
automatically when utility power
recovers after a complete battery
discharge.
[Enabled] [Disabled]
The UPS automatically starts up as
soon as utility power is available (no
need to press the X button).
Default settings
[Unitary UPS]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
19
Advertisement
Table of Contents
