Table of Contents
Advertisement
Chapter 10 UPS maintenance
Disassembling the LCD Display Bezel
1. Start by grasping the top and bottom portion of the center plastic part of the bezel that
encompasses the LCD, and pulling it away from the front of the unit
2. Use the 10T Torx screwdriver to remove the two screws on the left of the display. Take
care not to misplace the screws
3. Gently pull the left side of the front panel bezel to the left to expose the screws on the
right side of the display. The two screws on the top and bottom right-hand side become
visible
4. Using the T10 Torx screwdriver, remove the two screws on the right-hand side of the
display
154
6U Rack or Tower UPS RT8kVA and RT11kVA IUOMG
Advertisement
Table of Contents
