Compaq 3200 Reference Manual page 91

7. Set the active partition to the DOS partition you just created.
8. Use the FORMAT command to format the DOS partition to include the
necessary files to make the partition bootable. For example:
FORMAT C: /s
9. If you have a backup of your DOS partition, use it to create the previous
image. Otherwise, use your NetWare server diskettes and copy the
following files to a NetWare directory on your DOS partition:
SERVER.EXE
INSTALL.NLM
VREPAIR.NLM
MONITOR.NLM
CLIB.NLM
STREAMS.NLM
10. Copy the required disk drivers, LAN drivers, and utility NLMs that
should reside on the DOS partition from the Novell SSD.
11. Copy any other necessary information to the DOS partition, then reboot
your system. You can now start your NetWare server. You may need to
create your STARTUP.NCF file.
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Smart Array 3200 Controller Reference Guide
6-9