Compaq 3200 Reference Manual page 191

POST Error Messages
continued
Code
1766 Slot x Drive Array requires System ROM
Upgrade.
Run Systems ROMPaq Utility
(RESUME = F1 KEY)
1767 Slot x Drive Array Option ROM is not
Programmed Correctly or may Conflict with
the Memory Address Range of an ISA Card.
Check the Memory Address Configuration of
installed ISA Card(s) or
Run Options ROMPaq Utility to attempt
SMART-2/E Option ROM Reprogramming.
(RESUME = F1 KEY)
1768 Slot x Drive Array - Resuming logical drive
expansion process
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
Meaning
File Name: P-APPI.DOC Last Saved On: 12/7/98 9:35 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Recommended Action
Run the latest version of Systems ROMPaq. See
Chapter 3 for details.
Check the Memory Address Range of any ISA
cards that may be installed, and verify that they
do not conflict with the address of the SMART-
2/E Option ROM as shown in the System
Configuration Utility. If there is no conflict, run
Options ROMPaq and attempt to reprogram the
SMART-2/E Option ROM as described in the
section, "Running Option ROMPaq," in
Chapter 3 .
No action is required. This message appears
whenever a controller resets or apower cycle
occurs while array expansion is in progress.
Compaq Smart Array 3200 Controller Reference Guide
I-5
continued