Compaq 3200 Reference Manual page 120

6-38 Installing the Operating System Drivers
3. /A:[adapter index] [unit parameters]
This is a standard command line switch that causes the driver to modify
its behavior toward adapters.
[adapter index] is a number used to identify a controller. The index is
based on "0" for the lowest controller order number associated with the
adapter controlled by this ADD. The index increases by one for each
controller in the system as you move up the controller configuration
order.
Example: A system that has three adapters controlled by the
CPQARRAY.ADD, with the lowest configured adapter the secondary
controller.
[unit parameters] This ADD only supports the /I parameter to ignore a
controller. The following unit parameter is available: /I
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
Controller Index Configuration Order
Controller Order
2
3
5
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Table 6-1
Adapter Index
0
1
2