Compaq 3200 Reference Manual page 65

Logical/Physical Configuration
View Box
The Logical/Physical Configuration View box lists all the drives and arrays
configured for the selected controller. The name of the controller and the slot in
which it is installed are displayed next to each controller icon.
Figure 5-15. View Configuration list
For each controller, the drive arrays, logical drives, and physical drives
configured for that controller are listed. Use the Drive View options located
below the Configuration View box to select the Physical or Logical view.
Figure 5-15 shows the physical view of a Smart Array 3200 Controller in Slot 1.
Listed below the controller are two unassigned drives: one 9.1-GB drive and one
4.3-GB drive. This controller has two drive arrays – Array A and Array B, along
with a number of drives within each array. Array A has an online spare.
NOTE: When viewing the Configuration View box, selecting an item—a
controller, array, logical drive, or physical drive—will cause the hard drive tray
LEDs to blink. Use this feature to identify a specific physical drive or to identify
the external drives attached to a controller.
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: F-CH05.DOC Last Saved On: 12/7/98 1:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Smart Array 3200 Controller Reference Guide
5-21