Table of Contents
Advertisement
F-2 Replacing the Array Accelerator
Removing the Array Accelerator
To remove the optional Array Accelerator from the controller board:
Twist the latch 1 90 to allow the standoff to pull through the controller
1.
board.
Carefully pull the Array Accelerator daughterboard away 2 from the Smart
2.
Array 3200 Controller board, unplugging the signal connectors.
Figure F-1.
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
1
2
Removing Array Accelerator board from the Smart Array 3200 Array Controller
WARNING: Do not abuse, recharge, disassemble, dispose of in
fire or heat above 90 C, incinerate, or expose to water or fire.
Disposal of the batteries or Array Accelerator module should be
accomplished within compliance of local regulations or returned
to Compaq Computer Corporation by established parts-return
methods.
File Name: M-APPF.DOC Last Saved On: 12/2/98 2:08 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Advertisement
Table of Contents
