Compaq 3200 Reference Manual page 103

7. Highlight Compaq Drive Array in the list of displayed controllers and
press Enter.
After the driver has been loaded into memory, the Setup program returns
to the screen displayed in Step 4. Compaq Drive Array should appear in
the list of recognized mass storage devices. To install additional device
support, repeat Steps 4 through 7. Otherwise, continue with Step 8.
8. Press Enter and continue installation of Windows NT.
9. Reinsert the Compaq SSD for Windows NT diskettes as prompted. The
Setup program will copy the drivers to the system.
10. Finish installing Windows NT.
Installing the Smart Array 3200 Controller Driver
After Windows NT Installation
Execute the Setup program in the root directory of the Compaq SSD for
Windows NT utility to install or update the driver. This installation program
copies the appropriate driver and configures the system to use the driver.
1. Start Windows NT 3.51 or 4.0 and log in to an account with
administrative privileges.
2. Insert the Compaq SSD for Windows NT diskettes, one at a time, into
the diskette drive.
3. From the Program Manager, select File
4. Enter the following:
A:\setup
5. The Setup program displays a list of drivers that can be installed. Select
Compaq SCSI Controllers Support - Install/Remove.
6. Select Continue. In the SCSI Adapter Setup window, select Add. A
Setup dialog box asks you to confirm the addition of a SCSI controller
(adapter). Select OK.
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: G-CH06.DOC Last Saved On: 12/7/98 9:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Run.
Compaq Smart Array 3200 Controller Reference Guide
6-21