Table of Contents
Advertisement
5-30
Running the Array Configuration Utility
NetWare Online Array Configuration
Utility (CPQONLIN)
The NetWare Online Array Configuration Utility, also called CPQONLIN, is an
NLM for configuring your drive arrays without shutting down your server.
CPQONLIN also provides information about the status of drives attached to the
Smart Array 3200 Controller. It indicates drive failure, expansion, or waiting for
expansion or rebuild (queued). Before loading CPQONLIN.NLM, you must load
the appropriate device driver CPQARRAY.HAM. CPQONLIN.NLM is located
in the ONLINE directory of Novell SSD Disk 4. See driver installation
information in the NetWare section of Chapter 6.
Auto-Configuration
If no logical drives are configured, a CPQONLIN auto-configuration wizard
(Figure 5-23) appears and prompts you to select a fault-tolerance level.
CPQONLIN then configures arrays optimally for the selected fault tolerance.
Figure 5-23. Auto-configuration wizard with RAID 1 fault tolerance selected
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
File Name: F-CH05.DOC Last Saved On: 12/7/98 1:22 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Advertisement
Table of Contents
