Compaq 3200 Reference Manual page 37

3-6 Updating the Firmware
5. If the ROM firmware for the Smart Array 3200 Controller is the same or
newer than that on the Options ROMPaq diskette, you will get the
message:
Press Enter to go to step 9.
If the ROM firmware for the Smart Array 3200 Controller is older than
that on the Options ROMPaq diskette, you will get the Select An Image
screen:
Press Enter.
6. Review the information on the Caution screen:
Press Enter to reprogram the Smart Array 3200 Controller ROM or Esc
to discontinue the reprogramming and return to the Select An
Image screen.
7.
Indicates that the Smart Array 3200 Controller ROM is being
reprogrammed. DO NOT INTERRUPT.
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
The ROM image files found for the device selected
are not newer than the current ROM image
or
Device to reprogram:
Current ROM revision:
Select Firmware Images: COMPAQ Smart Array 3200 Controller y.yy
Device to reprogram:
Current ROM revision:
Selected ROM revision:
Reprogramming Firmware
CAUTION: Do not interrupt this cycle. Interrupting the ROM
reprogramming will leave the firmware in an unknown state. If
this happens, you may not be able to reprogram the ROM and the
Smart Array 3200 Controller ROM may have to be replaced. You
will be notified when reprogramming is complete.
File Name: D-CH03.DOC Last Saved On: 12/7/98 1:19 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
ALL COMPAQ Smart Array 3200 Controller(s)
COMPAQ Smart Array 3200 Controller x.xx
Smart Array 3200 Controller(s)
Smart Array 3200 Controller x.xx
Smart Array 3200 Controller y.yy