Migrating To/From Other Controllers - Compaq 3200 Reference Manual

D-6 Things You Should Know

Migrating to/from Other Controllers

The table below indicates what actions, if any, are required when migrating
from one array controller type to another.
NOTE: Compaq recommends that you should back up data any time you
move drive arrays or change your configuration.
TO
FROM
SMART-1
SMART-2/E
SMART-2/P
SMART-2SL
SMART-2DH
3100ES
3200
LEGEND:
X: No action required; backup of data is recommended prior to migrating to another controller.
BU/Restore: Backup and restore of data is mandatory to prevent data loss.
FW Upgrade: Destination controller should be upgraded to firmware version 3.04 or higher, using Options
ROMPaq before attaching drives.
Writer: Rickard Project: Compaq Smart Array 3200 Controller Reference Guide Comments: 340862-002
Migrating to/from Other Controllers
SMART-1 SMART-2/E
X X
BU/Restore X
BU/Restore X
BU/Restore FW Upgrade
BU/Restore FW Upgrade
BU/Restore FW Upgrade
File Name: K-APPD.DOC Last Saved On: 12/7/98 1:37 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Table D-2
SMART-2/P SMART-2SL
X X
X X
X X
FW Upgrade X
FW Upgrade X
FW Upgrade FW Upgrade
SMART-2DH 3100ES
and
3200
X X
X X
X X
X X
X X
FW Upgrade X