Table of Contents
Advertisement
NOTE:
The memory modules are hot to touch for some time after the system has been powered down. Allow the memory
modules to cool before handling them. Handle the memory modules by the card edges and avoid touching the components
or metallic contacts on the memory module.
Steps
1. Locate the appropriate memory module socket.
CAUTION:
Handle each memory module only by the card edges, ensuring not to touch the middle of the
memory module or metallic contacts.
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of the memory module
socket.
3. Lift the memory module away from the system.
Figure 87. Removing a memory module
Next steps
1.
Replace the memory
module. Install a memory module blank, if the memory module is removed permanently.
NOTE:
The procedure to install a memory module blank is similar to the procedure to install a memory module.
NOTE:
To ensure proper system cooling, memory module blanks must be installed in any memory socket that is not
occupied. The memory module blanks compatible with the R6625 are DDR5 gray color blanks. Remove the memory module
blanks only if you intend to install memory modules in those sockets.
Installing a memory module
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the air
shroud.
Safety instructions
Before working inside your system
Installing and removing system components
111
Advertisement
Table of Contents
