Dell PowerEdge R6625 Installation And Service Manual page 192

Figure 178. Sliding rails with CMA cabling
Strain Relief Bar (SRB)
The optional strain relief bar (SRB) for the PowerEdge R6625 organizes and supports cable connections at the rear end of the
server to avoid damage from bending.
Figure 179. Cabled strain relief bar
● Tool-less attachment to the rails
● Two depth positions to accommodate various cable loads and rack depths
● Supports cable loads and controls stresses on server connectors
● Cables can be separated into discrete purpose-specific bundles
Rack Installation
Drop-in design means that the system is installed vertically into the rails by inserting the standoffs on the sides of the system
into the J-slots in the inner rail members with the rails in the fully extended position. The recommended method of installation
is to first insert the rear standoffs on the system into the rear J-slots on the rails to free up a hand and then rotate the system
down into the remaining J-slots while using the free hand to hold the rail against the side of the system.
192 Installation