Table of Contents
Advertisement
7.2 Your Tybox controls several receivers
Heating configuration
Case No. 1: The heating/air conditioning installation requires that all receivers have the same heating
configuration
The CF07 parameter is applied by default to all receivers.
Case No. 2: The heating/air conditioning installation requires that all receivers have a different heating
configuration
To this end, press and hold the button on the receiver to be modified for 6 seconds until the LED stays lit. Release it.
Then, select the desired heating configuration by repeatedly pressing the
button:
1 flash: Heating
2 flashes: Air conditioning
3 flashes: Heating/Air conditioning
Press the button for 3 seconds to confirm your selection.
Control time base
Case No. 1: The heating/air conditioning installation requires that all the receivers have the same control time
base
The CF08 setting is applied simultaneously to all receivers.
1
mode
❶ From the same CF08
configuration menu, press + or -.
If the screen displays «--», this
indicates that the settings of the
receivers are different.
Case No. 2: The heating/air conditioning installation requires that the receivers each have a different control
time base
Example: Aeraulic (air conditioning)/hydraulic (heating) installation in the same room, controlled by a single Tybox.
This procedure is to be applied as many times as there are different time bases.
To do so:
1
mode
❶ From the same CF08
configuration menu, press + or -.
If the screen displays «--», this
indicates that the settings of the
receivers are different.
2
mode
mode
❷ Press + or - to configure your time
base setting.
2
OFF
mode
❷ Switch off the receivers that
are not affected by the time base
setting.
❸ Press + or - to configure your time
base setting.
3
mode
❸ Press briefly on mode to validate
and return to the CF08 menu.
3
4
mode
❹ Press briefly on mode to confirm
(takes you back to CF08).
Wait a few seconds until "dF 9" is
displayed.
❺ Restore the power supply to all
receivers.
Recommence operations ❶ to ❺
for each time base setting.
...
...
... ... ...
.. .. ..... .. ..
5
ON
mode
8
Advertisement
Table of Contents
