Associating To The Tydom App; Associating A Door/Window Magnetic Contact; Associating A Repeater - DELTA DORE Tybox 5300 Quick Start Manual

4. Associating to the Tydom app

Launch the Tydom app from your smartphone or tablet, then:
Settings -> My devices -> Add device -> Heating -> ... -> TYBOX 5300 (RF6050+)... and follow the instructions.
For more information, refer to the section § "Operation with the Tydom application".

5. Associating a door/window magnetic contact

Associating a motion sensor means you can switch the heating to Frost Protection if a window is opened (after 10
seconds).
> 3s
1
... ... ...
❶ Press the receiver button for 3
seconds until the red LED flashes.

6. Associating a repeater

If the radio range is too weak and the transmitter cannot be moved closer to the receiver, you can add an X3D
radio repeater to your installation (example: ERX 2000).
1
>3s
... ... ...
❶ Press the ERX 2000
receiver button for 3
seconds until the red
LED flashes. Release.
To verify the number of associated repeaters:
1
mode mode
>3s
❷ On the Tybox, briefly press a
button to wake up the display,
then press and hold both the
mode and + buttons for 3 seconds.
The screen displays rFxx
(depending on the number of
associated products). Release.
2
❷ Briefly press the detector button.
2
mode mode
>3s
❷ On the Tybox, briefly
press a button to wake
up the display, then
press and hold both the
mode and + buttons for
3 seconds.
The screen displays
rFxx (depending on the
number of associated
products). Release.
2
mode
>3s
❷ Press and hold mode for 3
seconds. The screen displays
rP depending on the number of
associated repeaters.
(eg: rP01 for 1 repeater).
OFF
3
❸ Make sure that the receiver LED
has stopped flashing.
3 4
❸ Press briefly on +. The
screen flashes until rF is
displayed depending on
the number of associated
receivers and repeaters
(❹)
(e.g. rF02 for 1 receiver and
1 repeater).
Check that the repeater's
LED is no longer flashing.
3
mode
>3s
❸ To exit:
- return to the rFxx menu, press
mode for 3 seconds,
- return to the initial display, briefly
press the mode and + buttons
simultaneously.
5
OFF
mode
❺To exit the mode,
briefly tap the mode and +
buttons simultaneously.
6