Epson PowerLite 62c User Manual page 67

3. Use the pointer button (or the down arrow button) and press
to select
Enter User's Logo
4. When you see a message asking if you want to use the present
image as a user's logo, select
displays over the image.
5. Use the pointer button on the remote control or the arrow
buttons on the projector to select the area of the image you want
to use. Once you have selected the area, press
6. When you see the message
press . If you want to change the area selected, select
Enter
press and repeat steps 5 and 6.
Enter
7. When you see this screen, select a zoom rate (display size), and
then press .
Enter
8. When you see the message
and press
Yes Enter
not use the projector or other sources (computer, video, etc.)
while the logo is being saved.
9. When you see the message
10. To display the logo as the background screen when the A/V Mute
button is press, select the
11. Select
Background Color
press .
Enter
12. When you're finished, press
.
and press
Yes Enter
Select this image?
Save image as user's logo?
. Saving the logo takes a few moments. Do
, press
Completed
menu and press
Display
and press . Then select
Enter
to exit the menus.
Menu
. A selection box
.
Enter
, choose and
Yes
,
No
, select
.
Esc
.
Enter
and
Logo
Fine-tuning the Projector
note
The default setting for the
option in
Startup Screen
the menu is . If
Display ON
the is set to
Startup Screen
, the logo will not
OFF
display at startup.
If the User's Logo Protect
function has been set to
ON
the
Background Color
setting cannot be changed.
You need to turn the protect
function off first. See page 68
for details.
Once you've saved a user's
logo, you cannot reset the logo
setting to its factory default
(no logo).
67
,