Viewing Lamp Usage And Other Information - Epson PowerLite 62c User Manual

note
You can make changes to
many of the signal settings on
the Signal menu. See page 58
for details.
note
The lamp usage timer doesn't
register until you've used the
lamp for at least 10 hours.
Fine-tuning the Projector
64
Viewing Lamp Usage and Other
Information
Use the Info menu to view information about the display settings of
your computer and the number of hours the lamp has been used.
1. Press the button and select the
Menu
the following menus:
Computer (analog RGB, digital RGB, RGB
Video/Component video, YCbCr, YPbPr)
Video (Composite video, S-Video)
■
Lamp Hours
Displays the number of hours the lamp has been used. The
life span of the lamp ranges from about 2000 hours in
brightness mode to about 3000 hours in
mode. If the number shown is close to 2000 or the
information is displayed in red, make sure you have a spare
lamp handy.
menu. You see one of
Info
High
brightness
Low