Connecting A Composite Video Source - Epson PowerLite 62c User Manual

Connecting a Composite Video Source

If you're connecting a composite video device, use a commercially
available RCA A/V cable. Before starting, make sure the projector and
your DVD player or other video source are turned off.
1. Connect the yellow RCA plug on one end of the cable to the
projector's yellow
2. Connect the yellow plug on the other end of the cable to the
video-out port on your video source.
3. To play sound through the projector, follow the instructions
beginning on page 29.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
If more than one device is connected to the projector, select the
correct source after projection starts by pressing the
button on the projector or the
See page 34.
jack.
Video
button on the remote control.
Video
Source Search
Setting Up the Projector
25