Epson PowerLite 62c User Manual page 84

Power Lamp
light light
Red Flashing red
Red Off
Red Flashing red
— Flashing orange
Red Off
Flashing red Off
Orange Off
Flashing Off
green
Green Off
Flashing Off
orange
Solving Problems
84
Temperature
light Description
Flashing red There is an internal error in the projector. Turn the
projector off and unplug it. Contact Epson for
help. See page 95.
Flashing red There is a problem with the fan or a sensor. Turn
the projector off and unplug it. Contact Epson for
help. See page 95.
Off The lamp is burned out, broken, or not installed
correctly; or the lamp cover is open. Close the
cover or replace or reseat the lamp, if necessary,
as described on page 77. If these suggestions
don't work, contact Epson.
Off Replace the lamp with a new one as soon as
possible; see page 77 for instructions. If you
continue to use the lamp, there is a risk it may
break.
Red The projector has overheated and turned itself
off. Let it cool for about five minutes, then turn it
back on. Make sure there is plenty of space
around and under the projector for ventilation.
Also clean the air filter and air exhaust vents. See
page 75. If it continues to overheat, you may
need to replace the air filter.
Flashing orange The projector is too hot. Make sure the
temperature surrounding the projector does not
exceed 95
around and under the projector for ventilation.
Clean the air filter and air vents, if necessary. See
page 75 for instructions.
Off The projector is in standby or sleep mode. You
can unplug it or press the
turn it on.
Off The projector is warming up. Wait for the image
to appear.
Off The projector is operating normally.
Off The projector is shutting down. Wait for the light
to stop flashing and remain orange before
unplugging it.
° °
F (35 C) and there is plenty of space
Power button to
P