Epson PowerLite 62c User Manual page 33

4. Turn on your computer or video source if you have not already.
5. Press the P
Power
(You can also press the P
Projector
The projector beeps and the power light flashes green as the
projector warms up. The projector lamp comes on in about 4
seconds and the power light stays green.
If you're using a computer, you should see your computer
■
display projected after a moment or two. If not, you need to
select the image source. See page 34.
(Windows only: If you see a message saying that it has found
a plug-and-play monitor, click
If you're projecting a video, press the
■
on the projector or remote control to switch to your video
source. Then press the
other device.
If you are prompted to enter a password, see page 69.
■
To focus and adjust the image, see page 37. If a projected image fails
to appear, see "What To Do If You See a Blank Screen" on page 34.
When you're done with your presentation, shut down the projector as
described on page 42.
button on top of the projector to turn it on.
button on the remote control.)
Power
Power button
Cancel
Source Search
button on your DVD player or
Play
Remote control
.)
button
note
If you are using the remote
control for the first time, be
sure to insert the batteries as
described on the Quick
Setup poster.
warning
Never look into the lens when
the lamp is on. This can
damage your eyes, and is
especially dangerous for
children.
Projecting
33