Using Snmp To Monitor The Projector - Epson PowerLite 1725 User Manual

Line 2: The IP address of the projector where the problem has
■
occurred
Line 3: Details of the problem
■

Using SNMP to Monitor the Projector

Network administrators can use SNMP (Simple Network
Management Protocol) to monitor projectors.
1. Press the button on the remote control, select the
Menu
menu, then press
Network
2. Choose
Network Configuration
3. Choose , then press
Others
.
Enter
and press .
Enter
. You see the following screen:
Enter
note
If you're a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you're monitoring.
Setting Up Network Projection
93