When the selected problem or warning occurs, an e-mail message is
sent to the specified notification addresses. The subject line of the
e-mail is
EPSON Projector
The e-mail includes the following information:
Line 1: The name of the projector where the problem has
■
occurred
Line 2: The IP address of the projector where the problem has
■
occurred
■
Line 3: Details of the problem
Using SNMP to Monitor the Projector
Network administrators can use SNMP (Simple Network
Management Protocol) to monitor projectors.
1. Press the
button on the remote control, select the
Menu
menu, then press
Network
2. Choose
Network Configuration
3. Choose
, then press
Others
4. Enter up to two IP addresses for notification.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used: 127.x.x.x,
.
.
Enter
and press
Enter
. You see the following screen:
Enter
note
If you're a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
.
receive trap alerts for the
projectors you're monitoring.
Using the Projector on a Network
59