Epson PowerLite 1725 User Manual page 103

projection area. If the image doesn't display properly after
you adjust the aspect ratio setting (see page 32), select
to project from a computer with a wide-panel display, or
for a computer with a 4:3 or 5:4 display.
Normal
■ Tracking
Adjust this value to eliminate vertical stripes in the image.
■ Sync
Adjust this value if the image appears blurry or flickers.
■ Position
If the image is slightly cut off on one or more sides, it may
not be centered exactly. Select this setting and use the
pointer button to center it.
■ Progressive
Select for moving images or
On
notice video delays during high-speed gaming, turn this
setting off.
■
Input Signal
If the colors don't look right on the
setting for the type of equipment you've connected to the
Computer (Component Video)
: For a computer connection.
RGB
Component Video
component video signal.
■ Video Signal
Leave this setting at
system (then select
■
Aspect
Choose an aspect ratio setting that allows the image to fit best
in the display area. See page 32 for details.
for still images. If you
Off
Auto
port:
: For a video player that outputs a
unless you are using a 60-Hz PAL
Auto
).
PAL60
Wide
setting, select the
Fine-Tuning the Projector
tip
Before adjusting tracking or
sync, fill the screen with an
image containing fine
detail, such as black text on
a white background.
103