You can also use the
Source
between devices connected to the ports identified on each button, or
™
select
to project wirelessly or from a USB drive.
EasyMP
Troubleshooting Display Problems
Follow these guidelines if you're having trouble displaying an image.
You Can't Project an Image
If you don't see the image you are trying to project, try the following:
Make sure the cables are connected correctly, as described
■
beginning on page 39.
Make sure the P
■
Power
A/V Mute slide is open.
If you've connected more than one computer and/or video source,
■
you may need to press the
projector's control panel or
to select the correct source. (Allow a few seconds for the projector
to sync up after pressing the button.)
■
If you're using a PC notebook, press the function key on your
keyboard that lets you display on an external monitor. It may be
labeled
or have an icon such as
CRT/LCD
hold down the
Fn
the projector to sync up after changing the setting.
■
See page 128 for more solutions.
buttons on the remote control to switch
light is green and not flashing and the
Source Search
button on the remote control
Search
key while pressing it. Allow a few seconds for
button on the
. You may have to
Displaying and Adjusting the Image
19