Positioning The Projector - Epson PowerLite 1725 User Manual

note
You can mount the projector
on the ceiling, or place it
behind a translucent screen
for rear projection. See
page 141 for details.
PowerLite 1725
Displaying and Adjusting the Image
14

Positioning the Projector

If the projector isn't already installed in the room you're using, you'll
probably want to place it on a table in front of the screen. This lets
you stand in the front of the room, face the audience, and remain
close enough to the equipment to be able to control it. Try to leave as
much space as possible between the projector and the screen to get a
good-size image.
Use the figures below to help you determine placement. (The image
shown below is projected at a 4:3 aspect ratio, but the PowerLite
1735W is capable of displaying images as wide as 16:10.) Image size
increases with distance, but can vary depending on how you position
the zoom ring and whether you've adjusted the image with other
settings.
Also keep these considerations in mind:
■ Place the projector on a sturdy, level surface.
Make sure there is plenty of space for ventilation around and
■
under the projector. Do not set the projector on top of anything
that could block the vents.
■ Make sure the projector is within 10 feet of a grounded electrical
outlet or extension cord.
TBD
PowerLite 1735W