What To Do When The Lights Flash - Epson PowerLite 1725 User Manual

What To Do When the Lights Flash

The lights on top of the projector indicate the projector's status.
Power light
Refer to the following table for a complete description of the
projector's status lights:
Status lights
Light Status
Orange
Flashing
green
Green
Flashing
orange
Red
Flashing red
Description
The projector is in sleep or standby mode. You can unplug it or press the
P
Power button to turn it on.
The projector is warming up. Wait for the image to appear.
The projector is operating normally.
The projector is cooling down. You can't turn it back on (and you should
not unplug it) until the light stops flashing and remains orange.
There is a problem with the projector. Check the other two lights and the
information on page 125 to diagnose the problem.
There is a problem with the fan or temperature sensor. The air filter or
vent may be clogged. Clean them or replace the air filter as described on
page 117.
If this does not resolve the problem, stop using the projector, disconnect
the power cable, and contact Epson as described on page 138.
Temperature
light
Lamp light
Solving Problems
125