Adjusting the Aspect Ratio
You can use the
button on the remote control to adjust how
Aspect
an image fits into the display area. Each time you press the button, the
projector changes to the next setting.
When Connected to Video Equipment
If you're projecting from video equipment such as a DVD player, set
the projector's
setting to match that of the player. For
Aspect
example, if the video player is set to output images at a 16:9 aspect
ratio, set the projector's
setting to
so they match. If the
Aspect
16:9
player outputs images at a 4:3 aspect ratio, select
(PowerLite 1725)
4:3
or
(PowerLite 1735W).
Normal
PowerLite 1735W
PowerLite 1725
4:3 setting
16:9 setting
Normal setting
16:9 setting
Note that the projector's native aspect ratio (XGA or WXGA,
depending on the model) is narrower than 16:9. Therefore,
widescreen movies and HDTV broadcasts will display with black bars
at the top and bottom when
is selected as the
setting. For
16:9
Aspect
the PowerLite 1735W, you can select
to stretch the image
Full
vertically to fill the whole projection area.
Using the Remote Control
32