Printing From A Digital Camera - Epson Stylus Photo RX600 User Manual

Printing From a Digital Camera

PictBridge and USB Direct Print allow you to print your photos by connecting
your camera to the Stylus Photo RX600.
1. Remove any memory cards from the RX600. (If you leave a card in the
printer, photos will be read from the memory card in the RX600 instead of
your camera.)
2. Connect the USB cable from your camera to the
front of the Stylus Photo RX600. Some digital cameras require a special USB
cable; if so, be sure to use the one that came with the camera.
3. Turn on the Stylus Photo RX600 and your camera. After a moment, the
Stylus Photo RX600 reads and counts the number of photos in your camera.
4. Press the
5. Use the d button to highlight
6. Press the
7. Choose the Paper Type, Paper Size, Layout, Resolution, and other print
settings (see page 90 for details).
8. When you have finished selecting print settings, press
9. Use the camera controls to print your photos. See your camera documentation
for printing instructions.
Note:
If your camera is not compatible with PictBridge or USB Direct Print, you'll see a
message saying that the connected device cannot be used. Epson cannot
guarantee the compatibility of any cameras.
120
Printing From Other Devices
EXT/IF USB
port
button to set the RX600 to Setup mode.
Setup
button.
OK
Direct print image set
USB port on the
EXT I/F
.
.
OK