Removing the Film Holder and Document Mat
1. Open the scanner lid and slide out the document mat. Set the mat aside so
you can reinstall it for scanning reflective documents later.
Note:
You can't scan film or slides unless the white document mat is removed from the
scanner lid.
2. Remove the film holder from its storage place. (Remember to replace the film
holder when you're done using it.)
3. Continue with one of these sections:
"Loading 35 mm Film Strips in the Film Holder" on page 109 (for film)
"Placing 35 mm Slides on the Film Holder" on page 110 (for slides)
108
Printing and Scanning Without a Computer